Product Information

The Corby 4400 Trouser Press. Featuring two pressing cycles of 15 or 30 minutes and a dish for keys, coins as well as a jacket hanger. Finished in a black ash wood grain effect to suit the modern interior.

The Corby 4400 Trouser Press in Black Ash

Product Code: 3505

Our Price

£159.00

NEXT DAY DELIVERY ITEM

Only 6 left in stock

Product Features

Finish: Black ash with black trim
Press Settings: 15 and 30 minute settings
Fitting: Freestanding unit, or can be wall mounted
Extras: Comes complete with feet, coin tray, jacket hanger and wall mounting fixtures
Features: Thermostat, Automatic cut off & Manual cancel option

Dimensions (mm):
Closed
Freestanding with hanger: H:1095 x W:465 x D:355
Freestanding without hanger: H:980 x W:415 x D:330
Wall Mounted: H: 940 x W:415 x D:115
Open
Freestanding with hanger: H:1095 x W:465 x D:480
Freestanding without hanger: H:980 xW:415 x D:455
Wall Mounted: H:940 x W:415 x D:345

Key Measurements

  mm inches
Height: 1095 43.11
Width: 465 18.31
Depth: 355 13.98

Frequently Asked Questions

  •  Why is the trouser press causing wrinkles in the wrong places?

    We recommend running the press on its longest setting whilst empty and allowing the press to cool and contract - repeat this process 2 or 3 times. Then any slack in the fabric should be removed.

  •  Why does the power light not go out?

    This is usual, whenever the press is powered the light will be lit, the only way to deactivate this feature is to switch off or unplug from the mains.

  •  What type of screws are needed to fix the hanger to the trouser press?

    You will need two 5/8 inch No.8 pan head self tapping screws.

  •  What is the depth of the trouser press when fully open??

    Our trouser presses measure 330mm when fully open.

  •  Where is the serial number located on the trouser press??

    The serial number can be found underneath the press.

  •  The arms on my new trouser press are stiffer than my previous model, why is this?

    The arms for opening and closing a Corby Trouser Press become gradually looser and freer over time, meaning that you might well find the arms to be stiff on a new model if you are used to operating one that is several years old. This is nothing to worry about and not a fault with the press.

Can’t find the answer you’re looking for?. Our experts are here to help!

Call +44 (0) 3300 882 065 To speak to an Expert or alternatively fill out the form below and a member of out team will get back to you.

Please tick the box for verification

    Write a Review

    Corby of Windsor wants to hear from you!